| Element | Length | Position | Spacing |
|---|
Method. Element spacing and lengths follow the DL6WU long-Yagi tables, with linear interpolation between element-diameter rows and between the tabulated director numbers. The boom correction comes from DL6WU's curve (a fraction of the boom diameter, added to each element): full correction for bonded through-boom elements, half for bonded elements on top of a round boom, 5% for elements insulated from a metal boom, and none for a non-conductive boom.
Coordinates. Millimetres. The boom runs along +Y, so the antenna points +Y. The reflector is at Y = 0 and the elements are centred on X = 0.
Before you cut. The driven element length is a starting point. Your feed (folded dipole, gamma match, split dipole) sets the final length, so trim it for best SWR. Check the parasitic lengths against a second calculator or a NEC model before committing expensive material.